Work progresses with fiberglass prep. Epoxy and fiberglass are really hard, so sanding them in a little area is a bit of a challenge.
In the midst of it.
Coveralls and a hooded sweatshirt mean I can get dirty while wearing pajamas.
Work progresses with the cleaning up of the top layer of new fiberglass work, below and forward of the mast step I would love to use the Festool, but there is a bit of a size restriction. I have my chisel on a stick and sander on a stick. Chisel on a stick is a 12" oak handle on an old chisel. The sander on a stick is a 3/4" drum sander on a 3/8" metal dowel.
No comments:
Post a Comment